How do I configure my Zoom ATA device for Plusnet VoIP service?

This configuration has been tested with ATA Firmware Revisions 1.2.4. See Finding your Zoom ATA's Firmware Revision.

First, you must access the ATA Manager:

• If you are using a Windows computer, download and run the Zoom ATA Manager.
• If you are using a non-Windows computer, or if the Zoom ATA Manager will not run on your computer, you can access the ATA Manager by entering the ATA’s IP address in your web browser’s address field. (Refer to FAQ 986 if you are not sure how to find your ATA’s IP address.)
• When prompted for a Username and Password, enter the following in lowercase letters:
       Username: administrator
       Password: metamorph

Once you are logged into the ATA Manager, click the Advanced icon at the top of the screen and then, in the left column, select VoIP Accounts and then Your VoIP Account.

On the Your VoIP Account page, enter the following:

Now click Save These Settings and then click Reboot ATA.

For a screenshot of an example configuration, click ATA_Plusnet.jpg in the File Attachments area below.