This configuration has been tested with ATA Firmware Revisions 1.1.2 and 1.2.5. See Finding your Zoom ATA's Firmware Revision.
First, you must access the ATA Manager:
- If you are using a Windows computer, download and run the Zoom ATA Manager.
- If you are using a non-Windows computer, or if the Zoom ATA Manager will not run on your computer, you can access the ATA Manager by entering the ATA’s IP address in your web browser’s address field. (Refer to FAQ 986 if you are not sure how to find your ATA’s IP address.)
- When prompted for a Username and Password, enter the following in lowercase letters:
Username: administrator
Password: metamorph
On the Your VoIP Account page, enter the following:
| Parameter | Setting |
| SIP Enable | Enable |
| Service Provider Name | Vitelity |
| Outbound Caller ID | Type your name or a display name you want to use |
| Phone Number (SIP User ID) | Type your Vitelity number or user name (e.g., 1234567 or myusername) |
| Auth User Name | Type your Vitelity number or user name (e.g., 1234567 or myusername) |
| Auth Password | Type your Vitelity password |
| SIP Server | sip3.vitelity.net |
| Auth Domain | Leave this field blank |
| Outbound Proxy | sip3.vitelity.net |
| Register Domain | sip3.vitelity.net |
| ReReg Interval | 120 |
| Subscribe Domain | Leave this field blank |
| ReSub Interval | 1200 |
| Use Outbound Proxy for REFER | Disable |
| Ring Type | 1 |
| Dial Prefix | Leave this field blank |
| Preferred Codecs |
Leave these settings blank |
Now click Save These Settings and then click Reboot ATA.
For a screenshot of an example configuration, click ATA_Vitelity.jpg in the File Attachments area below.
Comments
0 comments
Please sign in to leave a comment.