Model 5352/5354/5360: How to configure Port Forwarding using IPv4 rules

For Port Forwarding follow these steps:

1. Open up a web browser and type 192.168.0.1 in the address bar and hit Enter

2. At the login page type admin for the Username and Password

3. Select the Advanced tab

4. From the left side menu, click on Forwarding tab

5. Select Create IPv4 rule

6. The local IP address should be the IP address of the device you are trying to forward

7. The local start and end port should be the port you are trying to forward

8. The external IP address must remain 0.0.0.0

9. The external start and end ports are also the same port as before that you are trying to forward to

10. The protocol is both. Put brief description enable it and then hit Apply

If you need to open more ports follow the same steps as before just change the port number