How do I tether my MOTO Q Global device to the Mobile Broadband Router (3G)?

These instructions may vary slightly depending on the model of your MOTO Q, your firmware version, and service provider. These instructions assume that you have a service contract that supports tethering. Please consult your MOTO Q user manual for more information.

1. You need to change the USB device type to Modem. Depending on your model to do this select either:

For the MOTO Q Global with Windows Mobile 6.1:

From the Standby screen select Start à All Programs à Settings à More àConnections à USB Device Type

For other models:

From the Standby screen select Start à More à More à System Tools àSettingsà More à Connections à USB Device Type

1. Next, Press the right navigation key to select Modem.
2. Press Done

For most carriers you will need to set up your APN information in the router. To do this first enter the router Configuration Manager, then select Basic Settings à Basic Setup. On the Basic Setup page, enter the APN settings for your provider. If you don't know the APN settings please contact your provider or , for settings for many of the most popular wireless providers.

For example, if you are using your Moto Q with AT&T, use the following settings for the items shown: