Articles in this section

See more

How do I setup the 5754, 5751, 5760, and 5690 for an Xbox Live Connection?

Avatar
Andy
Updated
Follow

First, assign an IP address to your XBOX360

If you want your XBox 360 to connect to XBox Live, your modem must know what IP address your XBox 360 is using. Since you don't want this IP address to change, we suggest using Fixed DHCP Mapping as described below:

  1. Open your Web Browser (Internet Explorer, Firefox, etc) and type http://192.168.1.1 into the address bar, press enter. The router Configuration Manager will prompt you for a Username and Password:

  • Username: admin
  • Password: zoomadsl

  • Click Advanced Setup -> LAN to open the LAN page.

  • Under Fixed IP Mapping click on Add Entries.

  • Enter the MAC Address of the Xbox.

    • Tip: To find the MAC address of your device go to STATUS -> DHCP in the router Configuration Manager. This page shows you a list of all devices connected to your router as well as their MAC addresses and Host Names. By default your XBox 360 Host Name is blank.

  • Enter the IP address that you always want assigned to your Xbox. This address can be the one already given to it on the DHCP Status page or can be an unused IP address. For example, you can use 192.168.1.200 if none of the devices on the DHCP Status page has been assigned that IP address.

  • Click Save/Apply to store your settings.

    • Next, you have to disable UPnP and setup a DMZ for the XBox 360.

    1. While still in the router Configuration Manager, click on Advanced Setup -> LAN

    2. Uncheck the box labeled Enable UPnP

    3. Click Save/Reboot

    4. Now you need to setup DMZ for the assigned IP address of the Xbox. To do this click on NAT/DMZ Host Put the IP address assigned to the Xbox.

      Click Save/Apply.

    Congratulation, you should now be connected to Xbox Live

    Comments

    0 comments

    Please sign in to leave a comment.