How do I configure my Zoom ADSL X6v modem/router for Voxalot VoIP service?

First, you must access the Zoom Configuration Manager:
1. Open your web browser and type http://192.168.0.1 in the address bar field. Press Enter.
2. When the authentication dialog opens, type the following user name and password in lowercase letters, and then click OK.
  User Name: admin
  Password: zoomadsl (where "l" is a lowercase letter L)
Once you are logged into the Zoom Configuration Manager, click the VoIP icon on the Zoom menu bar.
Click the Advanced VoIP Setup icon on the Zoom menu bar.
On the left pane, click VoIP Accounts.

On the My VoIP Account page, enter the following:

Parameter	Setting
Turn My VoIP Service	On
My VoIP Provider's Name	Voxalot
My Caller ID When I Call Someone	Type your name or a display name you want to use
My VoIP Phone Number (SIP User ID)	Type your Voxalot number (e.g., 123456)
My VoIP Service Authorization ID	Type your Voxalot number (e.g., 123456)
My VoIP Service Authorization Password	Type your Voxalot password
SIP Server	us.voxalot.com
Auth Domain	Leave this field blank
Outbound Proxy	us.voxalot.com
Register Domain	us.voxalot.com
ReReg Interval	3600
Subscribe Domain	Leave this field blank
ReSub Interval	3600
Use Outbound Proxy for REFER	Disable
Ring Type	1
Dial Prefix	Leave this field blank
Preferred Codecs	Leave these settings blank

Click Save These Settings.
On the left pane, select Subscription Services and then Dialing Parameters.
On the Dialing Parameters page, select the following:
- Mode: Passthrough (pass * and # DTMF tones to provider)
- Configure PSTN Dial Pattern: replace *xx with *xxx
  (Note: After you make this change and click Save These Settings, the new VoIP Dial Pattern will be: 346]11|*xxx|**[1-9]e#r5xp3r*x|p8[1-9]e#r5xp4r*x|#[1-9]e#r5xp3r*x|1010Se#p2r*x|0Se#r5xp2r*x|123456789*0# )
Click Save These Settings and then click Reboot VoIP.

For screenshots of an example configuration, click ATA_Voxalot.jpg and ATA_Voxalot-DialParam.jpg in the File Attachments area below.