How do I access the ATA Manager on a Mac or Linux computer?

First, you need to find the IP address of the ATA so that you can use your computer's browser to log in to the ATA Manager. To do this;

• Log into your router and find a list of DHCP clients.
• Do you see only one client with a MAC Address that starts with 00 40 36 ? 
  • Yes
    • This is your ATA.
    • Select the corresponding IP Address and copy it into your browser's address bar, and press the Enter key on your keyboard.
    • When using the ATA Manager, you should initially use the following username and password
      • User Name: username
        Password: zoomvoip
        
  • No.
    • Unplug the ATA from power.
    • With your router's DHCP client list on-screen, refresh the list and then note the IP Addresses of all remaining devices with MAC Addresses that start with 00 40 36.
    • Now plug the ATA power back in, and wait about a minute. Refresh the DHCP client list again. There should be a new device with a MAC Address starting 00 40 36 that was not present before your ATA was unplugged.
    • Select the corresponding IP Address, copy it into your browser's address bar, and press the
      Enter key on your keyboard.
    • When using the ATA Manager, you should initially use the following username and password
      • User Name: username
        Password: zoomvoip

Note: you can add the ATA Manager to your Favorites list to easily access the ATA Manager in the future.